Features:

[Get more out of your music]

This speaker's multi-driver array brings out every detail of the mid and high frequencies.

Would you like to experience a more fresh speaker?

Our meticulously crafted QP Series speakers are designed to replace your old speakers and breathe new life into your music. You'll be able to enjoy the clear vocals, powerful guitar riffs, powerful drums, and distinctive bass lines that are always present in your favorite songs but are often obscured by lower-quality speakers. We aim to make your music rock!

The speakers with multi-layer mica array woofers that stay rigid when the volume is turned up, keeping distortion to a minimum for clean-sounding bass. Each woofer is paired with a midrange speaker, tweeter, and two super tweeters to add warmth and clarity to your driving soundtrack.

High-Fidelity Experience: Supports lossless audio formats, ensuring a lifelike, immersive soundstage for audiophiles.

Moisture-Resistant Design: Damp-proof construction with PP rubber and injection-molded diaphragms for lasting performance.

Versatile Power Output: 450W out power caters to diverse music preferences, from pop to rock with precision.

Powerful Sound Performance: Aerospace-grade magnets deliver dynamic sound with a driving force, perfect for various music genres.

Car Speakers 4x6 Inch| Dual Speaker For Car| High Sensitivity: Experience every nuance with 92dB sensitivity, ensuring detailed and clear audio reproduction.

Specification:

Color: Black
Voltage: 12V~24V
Distortion: Less than 1%
Speaker type: Coaxial speaker (Full frequency range)
Number of sound channels: 4 Ways
Maximum power: 450W
RMS: 36W
Woofer: 4x6"
Mid Range: φ 40mm
Tweeter: φ 12.5mm DOME
Impedance: 4 ohms
Sensitivity: 92dB(+1.5dB)
Frequency Response: 30 Hz to 36 kHz (-20dB)
Material: Metal + Magnet + Plastic
Applicable models: Universal Car, Truck, Bus, etc
Drum: PP injection molding
Diaphragm: Surround PP rubber
Product size: 4x6 inches
Speaker installation adaptation size: 4"X6" (10.2cmX15.2cm) and above holes

Package：
2X Speakers
2X Speaker cables
1X Screw kit

Installation Instructions

To protect the vehicle, cover it with a dust cloth.

Pry the door, unscrew the screws inside and around
the door panel, and force outward from the bottom of the door panel to remove the door.

Remove the original car horn first fix the gasket on the original car horn.

1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed

THE DETAILS SHOW THE QUALITY

TREBLE TOP
Let your voice flow smoothly
Soft and sweet
Raised tweeter
The sound is briaht and metallic

HIGH QUALITY RUBBER EDGE
High quality rubber edge
High temperature resistance
Can be used for a long time without deformation

ELASTIC WAVE
Power of bounce
Reduce the loss of distortion degree
Restore the real voice

NO SOLDERING WIRE TERMINALS
Solderless wire
Pure copper material terminals
Guaranteed signal transmission
Easy to operate

CAST IRON BASIN STAND
Cold steel forging technology
The horn pelvic frame is strong
Reduce resonance effect in use
The frosted process is durable

HIGH ENERGY MAGNET
The remanence is low
The recovery magnetic permeability is small
Coercive force is greater

Attention:

1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.

2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.

3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.

4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.

5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.

6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.

7. Please allow 1-2cm measuring deviation due to manual measurement.